TF350 or dedicated tools?
Choose by the work.
Compare a mixed-task demonstration kit with dedicated drilling, screwdriving and bolting tools. The choice depends on task frequency, required control and the attachments you need.
Change the accessory.
Change the task.
Wrench work
The outer square drive accepts compatible impact sockets for bolt and nut work.
Screwdriving
The hollow centre accepts compatible driver bits. Match the fastener profile and retention method to the selected bit.
Drilling
Compatible shank drill bits allow drilling tasks. This connection does not establish a hammer-drilling function, a torque clutch or the full working range of a dedicated drill.
Review TF350 specifications →Flexibility or task specialization?
| Decision | TF350 three-function route | Dedicated-tool route |
|---|---|---|
| Mixed jobs with frequent carrying | A compact three-function offer with the required accessories. | Separate tools require more storage but can remain set up for each job. |
| Repeated drilling | Check material, compatible bit and operating mode for the task. | Select chuck capacity, speed and drilling mode from the drill specification. |
| Screw fastening | Useful as part of the mixed-task kit; select compatible bits. | A dedicated driver keeps a fastening setup ready. Check its control and torque settings. |
| Higher-load bolting | Evaluate against TF350’s listed specification and the fastener task. | Compare GKR05 and GKR06 for a dedicated industrial wrench route. |
| Retail demonstration | Show socket, driver-bit and drill-bit changes with permitted accessories. | Show the specific function and selection advantage of each tool. |
| Battery and accessories | Agree the complete packing list; pictured accessories are not universal. | Match batteries and chargers per model; shared voltage is not proof of fit. |
A kit your team can explain.
Use TF350 as a demonstration-led addition to a hardware or online range. Explain what connects, which tasks it supports and what is included in the ordered configuration.
Offer dedicated drills, drivers and wrenches alongside it for customers whose work needs more specialization. Compare the complete configuration rather than torque alone.
Explore TF350 →Compare industrial wrenches →Before you place an order.
Does three-in-one mean it replaces every drill, driver and wrench?
No. It describes the supported task types through compatible accessories. The task, operating mode, control requirements and model specifications still determine suitability.
Can I use the flexible extension for impact wrench work?
Do not assume a flexible extension or ordinary socket is impact-rated. Use accessories rated for the exact operation and follow their limits.
Specify the range.
Start a useful conversation.
Choose your channel and list the jobs your customers need to complete. Include quantities and configurations so the discussion can move from a category to a workable order.
Submit your requirements to GEAKITA. You will receive a reference number after successful submission.