Furniture & fittings
Pair the correct screwdriver bit with the fastener. Start with a low clutch setting and increase only as the joint requires; a torque headline is not a screw-tightening setting.
GEAKITA · DK02HOME USE / CORDLESS DRILLS
DK02
Brushless hammer drill
For household repairs, furniture assembly and home improvement. Choose the chuck and drilling mode around the materials used in your home projects.
16.8VPlatform
60 N·mTorque specification
BrushlessMotor
Home & DIY series
Wood & metal preparation
Use a material-specific bit whose shank fits the chuck. Chuck capacity describes the clamped shank, not the maximum hole diameter in every material.
Add hammer-drilling choice
For suitable masonry work, select a masonry bit and the correct hammer mode. For reinforced concrete or sustained heavy drilling, evaluate the rotary-hammer category separately.
The details behind the selection.
The catalog configuration below is a reference, not the only battery option for this model. Request another capacity in the configuration form; the accepted order specification determines the supplied pack and quotation.
| Model | DK02 |
|---|---|
| Application series | Home use |
| Motor | Brushless · copper winding |
| Voltage | 16.8V |
| Torque specification | 60 N·m |
| Chuck capacity | 13mm |
| Chuck construction | Three-jaw metal ratchet chuck |
| No-load speed | 450–2000 rpm |
| Clutch / mode notation | 24+3 |
| Operating function | Drilling / screwdriving / hammer drilling |
| Bare tool weight | 0.93 kg |
| Tool dimensions | 16 × 20 × 5cm |
| Carton quantity | 8 units |
The specifications describe the quotation configuration. The supplied demonstration is labelled 55 N·m; it is a different documented rating and does not replace the catalog specification.
No-load speed is reproduced in the catalog’s notation; it is not a loaded working-speed guarantee. Torque figures are catalog declarations, not a cross-brand performance ranking.
SEE THE ORIGINAL PRODUCT
DK02 in motion.
Review the grip, control layout and product form in the supplied GEAKITA demonstration.
The specifications describe the quotation configuration. The supplied demonstration is labelled 55 N·m; it is a different documented rating and does not replace the catalog specification.
Compare the next sensible choices.
| Selection factor | DK02 ↗ | DK01-1 ↗ | DK03 ↗ |
|---|---|---|---|
| Application series | Home use | Home use | Home use |
| Motor | Brushless | Brushless | Brushless |
| Application | Hammer drilling | Hammer drilling | Hammer drilling |
| Voltage | 16.8V | 16.8V | 16.8V |
| Torque specification | 60 N·m | 65 N·m | 65 N·m |
| Chuck | 13mm | 10mm | 13mm |
| No-load speed | 450–2000 rpm | 0–1600 rpm | 450–2000 rpm |
| Clutch / mode notation | 24+3 | Function-specific control | 23+1 |
| Cell specification (not pack Ah) | 1300 mAh × 4 cells | 1300 mAh × 4 cells | 1300 mAh × 8 cells |
Compare function and interface first. Different battery configurations and test conditions can change performance.
Compare Any Three Drill Models →KIT & CHANNEL PLANNING
Turn DK02 into your assortment.
Specify the tool, battery quantity, charger plug and accessory pack together. Kit choices below describe your request; they are not a fixed packing list.
Catalog cell specification: 1300 mAh × 4 cells
The mAh value specifies individual cells. Complete-pack capacity depends on the cell arrangement; battery compatibility also requires the correct interface, electronics and charger.
Branded kit options.
These kit codes are separate catalog entries. Their battery specification does not redefine the bare-tool specification above.
GDK02
1300 mAh × 4 cells · catalog cell specification
10 units per carton
GDK02-1
1500 mAh × 4 cells · catalog cell specification
10 units per carton
Specify confidently.
Is chuck size the maximum drilling diameter?
No. Chuck capacity is the range of bit shanks it can hold. Hole capacity also depends on material, bit design and operating conditions; do not use chuck size as a drilling-capacity claim.
How should I select between these models?
Start with hammer drilling, then compare the chuck, motor, tool weight where listed and kit format. Use the comparison above to build a shortlist with a distinct role for each SKU.
Are batteries interchangeable across the range?
Match the exact tool interface, electrical specification and supported charger. A shared voltage label or similar cell count does not establish compatibility.
What should be included in an OEM brief?
Specify the model code, target market, quantity, logo placement, approved colour, packaging language, kit contents and acceptance requirements. Review OEM Solutions for the project scope.
Does the displayed kit include accessories?
Photographs show catalog configurations. Your order packing list defines included batteries, charger, case and bits. Accessories and destination-market charger are selected in the inquiry.
Original GEAKITA demonstrations.
DK02 · Drilling in practice
Tool presentation and drilling applications.
Explore the product →