Separate the workpiece
Specify the material and section thickness, then select a compatible cutting wheel and the required cutting guard. A cutting wheel is not a side-grinding accessory.
JM04 · 21 VGEAKITA / Professional SERIES
JM04
Build a complete grinding-tool offer.
Match the cordless tool to the customer’s cutting, grinding or finishing task, then define its battery, consumables and charger as one order configuration.
- Voltage
- 21 V
- Application series
- Professional
- Motor
- Brushless, pure copper
- No-load speed
- 0–12000 rpm
- Size specification
- 100 mm / 16 mm (catalog fields)
Specify the exact configuration.
| Model / order code | JM04 |
|---|---|
| Voltage | 21 V |
| Application series | Professional |
| Motor | Brushless, pure copper |
| No-load speed | 0–12000 rpm |
| Size specification | 100 mm / 16 mm (catalog fields) |
| Cell reference | 1500 mAh × 10 cells |
| Carton reference | 6 units |
Battery values describe individual cells and cell count. Specify complete-pack capacity separately. For JM models, check the listed 100 mm / 16 mm size together with the spindle, flange, wheel and guard requirements before selecting accessories.
JM03 / JM04
JM05 and JM05-1 are separate order references, both listed with 1800 mAh cells. Compare the full kit specification when choosing between them.
| JM03 | 1300 mAh × 10 cells; 6 units |
|---|---|
| JM04 | 1500 mAh × 10 cells; 6 units |
Choose the tool first, then request the battery capacity and quantity needed for your market. Each order should retain a clear configuration reference.
Compare the Full Range →Start with the task and material.
Remove material
Describe weld dressing, edge work or the stock-removal task. Match the grinding accessory, mounting parts and guard to the tool.
Define the finish
For suitable flap-disc work, specify the material and required finish before choosing the abrasive and grit. Confirm the actual accessory and guard combination.
| Wheel dimensions | Diameter, thickness and bore must match the approved tool setup. |
|---|---|
| Mounting interface | Match spindle thread, flange and clamping arrangement to the wheel. A 16 mm dimension alone does not specify the thread. |
| Accessory speed rating | The accessory rating must meet the tool’s maximum rated speed. Do not select a wheel from battery voltage alone. |
| Operating configuration | Specify the appropriate guard and auxiliary handle. Identification photos may omit these components and do not depict a ready-to-operate setup. |
Build the range around the customer.
Hardware & home improvement
Offer a clearly specified tool-and-accessory kit, supported by material-specific consumable replenishment and battery options.
Fabrication & maintenance supply
Collect the recurring material, operation and duty-cycle brief. Evaluate the tool and consumable together before repeat purchasing.
OEM & e-commerce
State the exact tool, batteries, charger, guard, handle and wheel assortment. Consistent photos and packing lists make model comparison easier.
CONFIGURE YOUR ORDER
Tool. Battery. Consumables.
Specify battery capacity and quantity, charger market, material and consumables. Pricing is supplied privately for the agreed configuration.
Make the selection specific.
Are the paired codes different-power tools?
Compare the listed specifications for each order code; JM05 and JM05-1 both have the same confirmed 1800 mAh cell configuration. A different code or battery capacity alone does not establish higher tool power.
Can I order another battery capacity?
Yes, submit a capacity preference and specify whether it refers to a cell or the complete pack. Physical fit, current capability and charger compatibility must match the tool.
Are all pictured discs included?
The agreed packing list defines delivery. Specify each disc type, size and quantity, as well as the guard and auxiliary handle.
Can the JM specifications be applied to GJM models?
No. Request the speed, dimensions and accessory interface for the exact GJM model. Similar appearance does not mean identical specifications.