Home & commercial fitting
Pair the correct screwdriver bit with the fastener. Start with a low clutch setting and increase only as the joint requires; a torque headline is not a screw-tightening setting.
GEAKITA · PT05HOME & COMMERCIAL / CORDLESS DRILLS
PT05
Brushless drill driver
For home improvement and commercial fitting, installation and maintenance. Build a versatile assortment by comparing chuck capacity, drilling functions and kit configurations.
21VPlatform
75 N·mTorque specification
BrushlessMotor
Home & commercial series
Installation drilling
Use a material-specific bit whose shank fits the chuck. Chuck capacity describes the clamped shank, not the maximum hole diameter in every material.
Keep non-impact selection clear
For assembly and conventional drilling, keep the non-impact kit easy to understand. Offer a hammer-drill alternative when the customer’s material requires that function.
The details behind the selection.
The catalog configuration below is a reference, not the only battery option for this model. Request another capacity in the configuration form; the accepted order specification determines the supplied pack and quotation.
| Model | PT05 |
|---|---|
| Application series | Home & commercial |
| Motor | Brushless · copper winding |
| Voltage | 21V |
| Torque specification | 75 N·m |
| Chuck capacity | 0.8-10mm |
| Chuck construction | Three-jaw metal ratchet chuck |
| No-load speed | 450–2000 rpm |
| Clutch / mode notation | 20+1 |
| Operating function | Drilling / screwdriving |
| Bare tool weight | 0.9 kg |
| Carton quantity | 8 units |
Specifications describe the catalog configuration. Battery and accessory selections are separate order choices.
No-load speed is reproduced in the catalog’s notation; it is not a loaded working-speed guarantee. Torque figures are catalog declarations, not a cross-brand performance ranking.
Compare the next sensible choices.
| Selection factor | PT05 ↗ | PT06 ↗ | PT06-1 ↗ |
|---|---|---|---|
| Application series | Home & commercial | Home & commercial | Home & commercial |
| Motor | Brushless | Brushless | Brushless |
| Application | Drilling & screwdriving | Hammer drilling | Hammer drilling |
| Voltage | 21V | 21V | 21V |
| Torque specification | 75 N·m | 75 N·m | 75 N·m |
| Chuck | 0.8-10mm | 1.5-13mm | 1.5-13mm |
| No-load speed | 450–2000 rpm | 450–2000 rpm | 450–2000 rpm |
| Clutch / mode notation | 20+1 | 24+3 | 23+3 |
| Cell specification (not pack Ah) | 1300 mAh × 10 cells | 1300 mAh × 10 cells | 1500 mAh × 10 cells |
Compare function and interface first. Different battery configurations and test conditions can change performance.
Compare Any Three Drill Models →KIT & CHANNEL PLANNING
Turn PT05 into your assortment.
Specify the tool, battery quantity, charger plug and accessory pack together. Kit choices below describe your request; they are not a fixed packing list.
Catalog cell specification: 1300 mAh × 10 cells
The mAh value specifies individual cells. Complete-pack capacity depends on the cell arrangement; battery compatibility also requires the correct interface, electronics and charger.
Specify confidently.
Is chuck size the maximum drilling diameter?
No. Chuck capacity is the range of bit shanks it can hold. Hole capacity also depends on material, bit design and operating conditions; do not use chuck size as a drilling-capacity claim.
How should I select between these models?
Start with drilling & screwdriving, then compare the chuck, motor, tool weight where listed and kit format. Use the comparison above to build a shortlist with a distinct role for each SKU.
Are batteries interchangeable across the range?
Match the exact tool interface, electrical specification and supported charger. A shared voltage label or similar cell count does not establish compatibility.
What should be included in an OEM brief?
Specify the model code, target market, quantity, logo placement, approved colour, packaging language, kit contents and acceptance requirements. Review OEM Solutions for the project scope.
Does the displayed kit include accessories?
Photographs show catalog configurations. Your order packing list defines included batteries, charger, case and bits. Accessories and destination-market charger are selected in the inquiry.