Home-improvement retail
Build an offer around furniture fittings and household installation tasks. Define the screw profile, material and suitable bit selection in the kit brief.
GEAKITA · QZ05CORDLESS IMPACT DRIVER / BRUSHLESS
QZ05
Two cell-specification options
Specify one QZ05 tool family with a choice of two catalog cell specifications for your purchasing brief.
3 speedsControl selection
3000 rpmHighest listed no-load speed
HexTool interface
Plan the tool around the fastener.
Installation supply
For fit-out and assembly buyers, compare the grip format, speed selections and battery configuration. Use sample evaluation on the customer’s actual joints to establish suitability.
Online & OEM channels
Show the exact tool and package contents together. Separate tool selection from battery count, charger plug, case and accessory options so buyers understand each SKU.
Know what you are specifying.
The catalog configuration below is a reference, not the only battery option for this model. Request another capacity in the configuration form; the accepted order specification determines the supplied pack and quotation.
| Model | QZ05 |
|---|---|
| Motor | Brushless, pure copper (catalog) |
| Voltage designation | 21 V |
| Torque specification values | 35 / 80 / 120 / 260 N·m |
| No-load speed | 0–1200 / 2400 / 3000 rpm |
| Speed selection | 3 speeds |
| Tool holder | Internal hexagonal holder |
| Cell specification — not pack Ah | 1300 or 1500 mAh × 10 cells |
| Units per carton | 8 |
Voltage: 21 V. Four torque values and three speed selections are listed without a mode-to-torque mapping; 260 N·m is not presented as a verified maximum.
No-load speed is reproduced in source notation. “Three-function with impact” appears in the catalog without a definition of those functions, so no individual function is claimed. The hex size and impact frequency are not specified in this source.
Compare the QZ configurations.
| Selection factor | QZ01 ↗ | QZ02 ↗ | QZ05 ↗ |
|---|---|---|---|
| Configuration | Compact handle-pack configuration | 8-cell catalog configuration | Two cell-specification options |
| Motor | Brushless | Brushless | Brushless |
| Voltage notation | 16.8 V | 16.8 V | 21 V |
| Torque specification values | 35 / 100 / 120 N·m | 50 / 100 / 140 N·m | 35 / 80 / 120 / 260 N·m |
| No-load speed | 0–1200 / 2400 / 3000 rpm | 0–1200 / 2400 / 3000 rpm | 0–1200 / 2400 / 3000 rpm |
| Speed selection | 3 speed selections | 3 speed selections | 3 speed selections |
| Tool holder | Internal hexagonal holder | Internal hexagonal holder | Internal hexagonal holder |
| Cell specification | 1300 mAh × 4 cells | 1300 mAh × 8 cells | 1300 or 1500 mAh × 10 cells |
Torque values retain the catalog notation. They are not a verified performance ranking or a mapping to the three speed selections. Cell specifications are not battery-pack Ah ratings.
YOUR PURCHASING BRIEF
Build your QZ05 offer.
Choose the order format and destination market, then describe your accessory and packaging needs. These choices record your request; they do not define an included-parts list.
Catalog cell specification: 1300 or 1500 mAh × 10 cells
A clearer fastening offer.
Which model should lead my range?
Two cell-specification options. Compare the model table, then select the configuration that fits your market and sample-evaluation requirements.
Are the listed torque numbers three calibrated settings?
The source lists several torque values but does not map them to operating modes or define the test method. Do not treat them as calibrated screw-tightening settings.
Which bits and batteries are included?
The agreed order packing list defines included accessories and battery quantities. Match the exact holder and battery interface; a shared voltage label alone does not establish compatibility.
Is GQZ02 the same specification as QZ02?
Keep these order references separate. The branded GQZ02 entries are labelled 21 V; the base QZ02 entry is labelled 16.8 V. The kit listing does not establish a shared motor, torque or speed specification.
What can I request for an OEM project?
Submit the model, target market, quantity, logo and colour requirements, packaging language and kit contents. The OEM scope review defines the accepted customisation and sample requirements.