Specify the working fit
Provide the fastener profile, required reach, bit-holder interface and tool model. Identify whether the job uses rotary or impact operation.
35-piece mixed bit set
Multiple profiles and reach lengths in an organised case support demonstrations, starter kits and replacement accessory sales.
| Material | Component-specific steel grades; not specified for the complete set |
|---|---|
| Specification | 35-Piece Set in Green Box |
| Use | Mixed screw profiles and light installation tasks; choose each component for its intended operation. |
| Range-building advantage | Multiple profiles and reach lengths in an organised case support demonstrations, starter kits and replacement accessory sales. |
Know what is in the set.
| 25mm Screwdriver Bit | Phillips PH1/PH2/PH3 · quantity 3 |
|---|---|
| 25mm Screwdriver Bit | Hex Bit H3/H4/H5/H6 · quantity 4 |
| 25mm Screwdriver Bit | Torx Bits T10*2/T15/T20/T25/T30/T40 · quantity 7 |
| 25mm Screwdriver Bit | Square Bits SQ1 / SQ2 / SQ3 · quantity 3 |
| 25mm Screwdriver Bit | Slotted Bits 4 / 5 / 6 / 7 mm · quantity 4 |
| 50/60/70mm | Anti-slip Bits*3 Impact Bits*3 · quantity 6 |
| Bit Holder / Bit Extension Rod | PH2 · quantity 1 |
| 42mm Socket | 8 · quantity 1 |
| Electrician Screwdriver Bits | 65/110mm · quantity 2 |
| 100mm Screwdriver Bit | TT10/PH2/H4/H5 · quantity 4 |
Specify the complete packing list before ordering, including individual tools, combined assemblies and the case. Piece-count conventions may vary by kit.
Build a repeatable offer
Record the material grade, size mix, piece count, packaging and branding for each order. Match replacement packs to the profiles your customers use most.
Buy the specification behind the accessory.
Does S2 or S3 alone prove a longer service life?
No. Steel grade is one part of the specification. Geometry, heat treatment, hardness, fit and the actual working conditions also matter. GEAKITA does not claim a service-life multiplier without a corresponding test.
Are all bits, sockets and extensions impact-rated?
No blanket impact rating is implied. Specify the exact tool and operating mode, then select rated components. Flexible extensions and ordinary sockets must not be assumed suitable for impact use.
Can every disc fit a GEAKITA angle grinder?
No. Match diameter, bore, maximum operating speed, guard and intended operation. A 22.23 mm bore does not automatically fit a 16 mm or 20 mm interface. Wet-use accessories also require a suitable machine and working method.
Can mixed sets use an upgraded steel grade?
Specify the material for each component in your OEM brief. Mixed sets may contain different grades; an S2 designation should identify the applicable components.