Explore ten grinding and finishing references, from concrete removal and stone grinding to floor preparation and progressive polishing.
Compare the Range ↓
Removing concrete surface material with a matching grinding setup.
| Specification | 110mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Grinding stone surfaces with a matching grinding setup.
| Specification | 110mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 55mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 65mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 80mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 100mm · 5mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 100mm · 8mm · bore 22mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Progressive surface finishing; select grit and a process compatible with the disc’s wet/dry rating.
| Specification | 80mm · Mesh size 60#, 120#, 200# |
|---|---|
| Range advantage | Grit and backing choices let the assortment follow the required surface finish. |
Surface preparation / finishing selection; match profile, grit and backing to the workpiece.
| Specification | 100mm · Adhesive fabric, non-adhesive fabric · Mesh size30#、50#、80#、120# |
|---|---|
| Range advantage | Grit and backing choices let the assortment follow the required surface finish. |
Progressive surface finishing; select grit and a process compatible with the disc’s wet/dry rating.
| Specification | 100、80mm · Mesh size60#、120#、200# |
|---|---|
| Range advantage | Grit and backing choices let the assortment follow the required surface finish. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 110mm · 5mm · bore 20mm |
| Use | Removing concrete surface material with a matching grinding setup. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 110mm · 5mm · bore 20mm |
| Use | Grinding stone surfaces with a matching grinding setup. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 55mm · 5mm · bore 20mm |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 65mm · 5mm · bore 20mm |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 80mm · 5mm · bore 20mm |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 100mm · 5mm · bore 20mm |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 100mm · 8mm · bore 22mm |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 80mm · Mesh size 60#, 120#, 200# |
| Use | Progressive surface finishing; select grit and a process compatible with the disc’s wet/dry rating. |
| Range-building advantage | Grit and backing choices let the assortment follow the required surface finish. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 100mm · Adhesive fabric, non-adhesive fabric · Mesh size30#、50#、80#、120# |
| Use | Surface preparation / finishing selection; match profile, grit and backing to the workpiece. |
| Range-building advantage | Grit and backing choices let the assortment follow the required surface finish. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 100、80mm · Mesh size60#、120#、200# |
| Use | Progressive surface finishing; select grit and a process compatible with the disc’s wet/dry rating. |
| Range-building advantage | Grit and backing choices let the assortment follow the required surface finish. |
The 110 mm concrete-removal and stone wheels serve different surface tasks. Identify the substrate before selecting the wheel profile.
55, 65, 80 and 100 mm diamond grinding references broaden the range of working diameters. Verify bore, machine speed and guard.
Floor finishing options include 30, 50, 80 and 120 grit references; water-grinding and sintered polishing options list 60, 120 and 200 grit. Follow the selected product’s process.
For the 100 mm floor-finishing reference, select adhesive or non-adhesive fabric backing with the corresponding holder.
No. Steel grade is one part of the specification. Geometry, heat treatment, hardness, fit and the actual working conditions also matter. GEAKITA does not claim a service-life multiplier without a corresponding test.
No blanket impact rating is implied. Specify the exact tool and operating mode, then select rated components. Flexible extensions and ordinary sockets must not be assumed suitable for impact use.
No. Match diameter, bore, maximum operating speed, guard and intended operation. A 22.23 mm bore does not automatically fit a 16 mm or 20 mm interface. Wet-use accessories also require a suitable machine and working method.
Specify the material for each component in your OEM brief. Mixed sets may contain different grades; an S2 designation should identify the applicable components.