Compare seven cutting references by diameter, thickness and mounting bore. Thin diamond discs, a dual-purpose reference and an abrasive cutting disc have distinct roles.
Compare the Range ↓
Tile and ceramic cutting; select the disc-rated workpiece and operating method.
| Specification | 125 mm · 1.1mm · bore 22.23mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Tile and ceramic cutting; select the disc-rated workpiece and operating method.
| Specification | 115 mm · 1.1mm · bore 22.23mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Tile and ceramic cutting; select the disc-rated workpiece and operating method.
| Specification | 110 mm · 1.1mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Tile and ceramic cutting; select the disc-rated workpiece and operating method.
| Specification | 105 mm · 1.1mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Cutting and edge grinding where the disc marking permits both operations.
| Specification | 105 mm · 1.3mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Cutting selection for the specified workpiece and disc-rated operation.
| Specification | 106 mm · 1.1mm · bore 20mm |
|---|---|
| Range advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
Cutting with a matched guard, bore and speed rating; do not use a cutting disc for side grinding.
| Specification | 100mm · 2.5mm · bore 16mm |
|---|---|
| Range advantage | Grit and backing choices let the assortment follow the required surface finish. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 125 mm · 1.1mm · bore 22.23mm |
| Use | Tile and ceramic cutting; select the disc-rated workpiece and operating method. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 115 mm · 1.1mm · bore 22.23mm |
| Use | Tile and ceramic cutting; select the disc-rated workpiece and operating method. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 110 mm · 1.1mm · bore 20mm |
| Use | Tile and ceramic cutting; select the disc-rated workpiece and operating method. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 105 mm · 1.1mm · bore 20mm |
| Use | Tile and ceramic cutting; select the disc-rated workpiece and operating method. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 105 mm · 1.3mm · bore 20mm |
| Use | Cutting and edge grinding where the disc marking permits both operations. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Diamond abrasive (catalog material) |
|---|---|
| Specification | 106 mm · 1.1mm · bore 20mm |
| Use | Cutting selection for the specified workpiece and disc-rated operation. |
| Range-building advantage | A clearly specified diameter, bore and section lets buyers select by fit rather than appearance. |
| Material | Request the abrasive grade for your application |
|---|---|
| Specification | 100mm · 2.5mm · bore 16mm |
| Use | Cutting with a matched guard, bore and speed rating; do not use a cutting disc for side grinding. |
| Range-building advantage | Grit and backing choices let the assortment follow the required surface finish. |
Match the disc diameter to the grinder and guard. A larger disc is not an upgrade for a machine that does not accept it.
The diamond cutting references include 1.1 mm and 1.3 mm sections. Select by the exact product and task; thickness is not a service-life rating.
Choose the stated 16, 20 or 22.23 mm mounting size. Verify the flange and mounting system before ordering.
Use a cutting disc for cutting. Side grinding is only appropriate for a disc specifically marked for that operation.
Find grinding options →No. Steel grade is one part of the specification. Geometry, heat treatment, hardness, fit and the actual working conditions also matter. GEAKITA does not claim a service-life multiplier without a corresponding test.
No blanket impact rating is implied. Specify the exact tool and operating mode, then select rated components. Flexible extensions and ordinary sockets must not be assumed suitable for impact use.
No. Match diameter, bore, maximum operating speed, guard and intended operation. A 22.23 mm bore does not automatically fit a 16 mm or 20 mm interface. Wet-use accessories also require a suitable machine and working method.
Specify the material for each component in your OEM brief. Mixed sets may contain different grades; an S2 designation should identify the applicable components.