DESIGN PREVIEW Website preview · English edition
Powering Smart Work EveryWhere
Contact Us
English
GEAKITA / COMMERCIAL FLOOR CARE

C2 Pro

Automated water handling for larger cleaning routes

Scrubbing / vacuuming / sweeping / mopping. Suggested site scale: 2,000–10,000 m².

Cleaning efficiency
800–1,200 m²/h
Cleaning width
440 mm scrubbing / 560 mm vacuuming
Clean / waste water
8 / 8 L
GEAKITA C2 Pro commercial floor-cleaning robot
WORKFLOW & VALUE

Less manual water handling.

How the cleaning job works

An automated docking station supports charging and water refill/drainage. A mobile 30 L / 30 L external tank is an option for sites without convenient plumbing. Include the station, water supply, drainage and installation scope in the project specification.

What to demonstrate to your customer

Show a complete task-to-dock cycle, including station access, water exchange and resumed work. Assess intervention frequency rather than promising unattended operation around the clock.

TECHNICAL SPECIFICATIONS

C2 Pro at a glance.

Connectivity4G / Wi-Fi
Noise≤65 dB
Battery chemistryLithium iron phosphate (LFP)
FunctionsScrubbing / vacuuming / sweeping / mopping
Dimensions571 × 505 × 698 mm, without side brushes
Weight55 kg
Cleaning width440 mm scrubbing / 560 mm vacuuming
Cleaning efficiency800–1,200 m²/h
Clean / waste water8 / 8 L
Maximum suction20 kPa
Battery25.6 V / 36 Ah
Reference runtime3.5 h (standard battery)
Charging time3.5 h
Travel speed0.1–0.8 m/s, adjustable
Protection ratingIP33
Minimum passage75 cm
Maximum gradient7°
Obstacle clearance10 mm
Sensors2D LiDAR, 6-axis IMU, ultrasonic and RGB structured-light camera
ManagementApp, web and onboard screen
Optional battery25.2 V / 70 Ah ternary lithium; 4–7 h reference runtime
Optional external water tank30 / 30 L; 690 × 550 × 670 mm

Catalog reference specifications. Runtime and productivity depend on cleaning mode and site conditions. Dimensions that exclude side brushes do not describe the full operating envelope. Confirm the selected robot, battery and station configuration in the order specification.

FROM FLOOR PLAN TO DAILY ROUTINE

Automation works best
with a clear operating plan.

01 / MAP & ZONE

Define where it can work.

Survey passages, thresholds, slopes, stairs, glass and changing obstacles. Create cleaning zones, restricted areas and schedules around people and business hours.

02 / CLEAN & RECOVER

Match the mechanism to the floor.

Brushes loosen dirt; the suction and recovery system collect debris and dirty water. Separate suitable hard-floor scrubbing from carpet vacuuming. Test the finish and cleaning chemistry on site.

03 / REPLENISH

Plan the service point.

Charging, fresh water, wastewater and consumable access all matter. C2 Pro can use an automated water-exchange station; the optional external tank offers another water-supply arrangement.

04 / MAINTAIN & REVIEW

Keep an operator in the routine.

Empty and rinse tanks, inspect brushes and squeegees, clear debris and review task results. Record missed areas and interruptions so the route can be improved.

C2 / C2 PRO / C3 MINI

Compare the route.
Then compare the robot.

Selection factorC2C2 ProC3 Mini
Suggested site scale1,000–2,000 m²2,000–10,000 m²100–1,000 m²
FunctionsScrubbing / vacuuming / moppingScrubbing / vacuuming / sweeping / moppingSweeping / vacuuming / scrubbing / mopping
Cleaning efficiency500–800 m²/h800–1,200 m²/h300 m²/h
Cleaning width440 mm440 mm scrubbing / 560 mm vacuuming350 mm scrubbing / 530 mm sweeping
Clean / waste water10 / 10 L8 / 8 L5 / 3.5 L
Battery25.6 V / 36 Ah25.6 V / 36 Ah24 V / 15 Ah
Reference runtime5–12 h3.5 h (standard battery)1.5 h
Charging time3 h3.5 h1.5 h
Dimensions503 × 503 × 629 mm571 × 505 × 698 mm, without side brushes400 × 400 × 410 mm, without side brushes
Weight42 kg55 kg27 kg

Site scale is an initial selection guide. Efficiency and runtime are catalog references, not guaranteed site output. Route complexity, cleaning mode, floor condition and service stops affect the result. C2 Pro efficiency follows the detailed specification table; validate the planned route during a site trial.

REQUEST A SITE-MATCHED PROPOSAL

Tell us about
the floor, not just the area.

Share the route, floor finish and service conditions. We can then discuss model selection, docking, local support and distribution or OEM requirements.

Submit your requirements to GEAKITA. You will receive a reference number after successful submission.

BUYER QUESTIONS

Make the operating scope clear.

Which model is best for a small store?

C3 Mini is the compact starting point, with a 60 cm minimum navigable width and a 50 cm minimum clearance height in the specification table. The complete route still needs an on-site turning and access assessment.

Does C2 Pro need a permanent water connection?

The docking configuration can support automatic water exchange. An optional 30 L / 30 L mobile external tank is described for sites without convenient plumbing. Agree the station and tank scope before ordering.

Can the robot use lifts and access gates?

Elevator and gate integration is a project option, not a universal out-of-box feature. Review equipment interfaces, permissions, connectivity and commissioning requirements for the actual site.

Can a cleaning robot replace all manual cleaning?

Robots can handle planned accessible floor routes. People still manage exceptions, stairs, inaccessible corners, consumables and maintenance. Use a site trial to establish the division of work.

What should a pilot project measure?

Measure cleanable area completed within the agreed shift, missed zones, operator interventions, water and charging stops, and the agreed floor-cleanliness result. Record the mode and site conditions alongside each result.

What comes with a distribution or OEM proposal?

Define the robot version, station and options, spare parts, training, branding scope, destination documentation and service responsibilities. Pricing is supplied privately against the agreed configuration.

YOUR NEXT PRODUCT OPPORTUNITY

Let’s build your
product range.

PLAN YOUR NEXT STEP

Your product inquiry

Submit your requirements to GEAKITA. You will receive a reference number after successful submission.