How the cleaning job works
Automatic low-battery return and task resumption support scheduled routines. Plan operator access for water handling, tank cleaning and wear-part checks; automatic water exchange is a C2 Pro docking configuration.
GEAKITA / COMMERCIAL FLOOR CARE
C2
Daily floor care for established facilities
Scrubbing / vacuuming / mopping. Suggested site scale: 1,000–2,000 m².
- Cleaning efficiency
- 500–800 m²/h
- Cleaning width
- 440 mm
- Clean / waste water
- 10 / 10 L
A repeatable daily cleaning routine.
What to demonstrate to your customer
Show zone scheduling, obstacle response, floor recovery and the low-battery return workflow. Compare the full route result and service time, not just a maximum suction figure.
C2 at a glance.
| Connectivity | 4G / Wi-Fi |
|---|---|
| Noise | ≤65 dB |
| Battery chemistry | Lithium iron phosphate (LFP) |
| Functions | Scrubbing / vacuuming / mopping |
| Dimensions | 503 × 503 × 629 mm |
| Weight | 42 kg |
| Cleaning width | 440 mm |
| Cleaning efficiency | 500–800 m²/h |
| Clean / waste water | 10 / 10 L |
| Maximum suction | 20 kPa |
| Battery | 25.6 V / 36 Ah |
| Reference runtime | 5–12 h |
| Charging time | 3 h |
| Travel speed | 0.1–0.8 m/s, adjustable |
| Brush downforce | 20–40 N |
| Protection rating | IP34 |
| Sensors | 2D LiDAR, 6-axis IMU, ultrasonic and structured-light camera |
| Management | App, web and onboard screen |
Catalog reference specifications. Runtime and productivity depend on cleaning mode and site conditions. Dimensions that exclude side brushes do not describe the full operating envelope. Confirm the selected robot, battery and station configuration in the order specification.
Automation works best
with a clear operating plan.
Define where it can work.
Survey passages, thresholds, slopes, stairs, glass and changing obstacles. Create cleaning zones, restricted areas and schedules around people and business hours.
Match the mechanism to the floor.
Brushes loosen dirt; the suction and recovery system collect debris and dirty water. Separate suitable hard-floor scrubbing from carpet vacuuming. Test the finish and cleaning chemistry on site.
Plan the service point.
Charging, fresh water, wastewater and consumable access all matter. C2 Pro can use an automated water-exchange station; the optional external tank offers another water-supply arrangement.
Keep an operator in the routine.
Empty and rinse tanks, inspect brushes and squeegees, clear debris and review task results. Record missed areas and interruptions so the route can be improved.
Compare the route.
Then compare the robot.
| Selection factor | C2 | C2 Pro | C3 Mini |
|---|---|---|---|
| Suggested site scale | 1,000–2,000 m² | 2,000–10,000 m² | 100–1,000 m² |
| Functions | Scrubbing / vacuuming / mopping | Scrubbing / vacuuming / sweeping / mopping | Sweeping / vacuuming / scrubbing / mopping |
| Cleaning efficiency | 500–800 m²/h | 800–1,200 m²/h | 300 m²/h |
| Cleaning width | 440 mm | 440 mm scrubbing / 560 mm vacuuming | 350 mm scrubbing / 530 mm sweeping |
| Clean / waste water | 10 / 10 L | 8 / 8 L | 5 / 3.5 L |
| Battery | 25.6 V / 36 Ah | 25.6 V / 36 Ah | 24 V / 15 Ah |
| Reference runtime | 5–12 h | 3.5 h (standard battery) | 1.5 h |
| Charging time | 3 h | 3.5 h | 1.5 h |
| Dimensions | 503 × 503 × 629 mm | 571 × 505 × 698 mm, without side brushes | 400 × 400 × 410 mm, without side brushes |
| Weight | 42 kg | 55 kg | 27 kg |
Site scale is an initial selection guide. Efficiency and runtime are catalog references, not guaranteed site output. Route complexity, cleaning mode, floor condition and service stops affect the result. C2 Pro efficiency follows the detailed specification table; validate the planned route during a site trial.
REQUEST A SITE-MATCHED PROPOSALTell us about
Tell us about
the floor, not just the area.
Share the route, floor finish and service conditions. We can then discuss model selection, docking, local support and distribution or OEM requirements.
Submit your requirements to GEAKITA. You will receive a reference number after successful submission.
Make the operating scope clear.
Which model is best for a small store?
C3 Mini is the compact starting point, with a 60 cm minimum navigable width and a 50 cm minimum clearance height in the specification table. The complete route still needs an on-site turning and access assessment.
Does C2 Pro need a permanent water connection?
The docking configuration can support automatic water exchange. An optional 30 L / 30 L mobile external tank is described for sites without convenient plumbing. Agree the station and tank scope before ordering.
Can the robot use lifts and access gates?
Elevator and gate integration is a project option, not a universal out-of-box feature. Review equipment interfaces, permissions, connectivity and commissioning requirements for the actual site.
Can a cleaning robot replace all manual cleaning?
Robots can handle planned accessible floor routes. People still manage exceptions, stairs, inaccessible corners, consumables and maintenance. Use a site trial to establish the division of work.
What should a pilot project measure?
Measure cleanable area completed within the agreed shift, missed zones, operator interventions, water and charging stops, and the agreed floor-cleanliness result. Record the mode and site conditions alongside each result.
What comes with a distribution or OEM proposal?
Define the robot version, station and options, spare parts, training, branding scope, destination documentation and service responsibilities. Pricing is supplied privately against the agreed configuration.